 |
1. Turn off the supply keg by
lifting the handle on it’s tap.
|
2. Disconnect the OUT hose from
the supply keg and replace it with the transfer hose.
|
3. Remove the top of the keg in
your Tote-A-Keg. Connect the black OUT connector to the Tote-A-Keg OUT
side.
|
4. Fill your Tote-A-Keg by
opening the tap of the supply keg.
|
5. When the beer is four or
five inches from the top of the Tote-A-Keg replace the top on the
Tote-A-Keg. The beer will continue to transfer until the pressure of
the two kegs are equal. This helps keep your beer fresher and you
start with a pressurized keg.
|
6. Disconnect the black OUT
connector from the Tote-A-Keg.
|
7. Reconnect tap from the top
of the supply keg.
|
8.Reconnect the normal beer
line to the top of the supply keg.
|
| 9. Take off the black connector
and rinse out the transfer hose with warm tap water. |
| |
